Scotchguard is a tool that could and should be every homeowner’s best friend. You just spray the aerosol solution on your carpet or upholstery and, just like that, your fabric surfaces are protected by magical spill-proof armor. However, for whatever reason, a surprising number of homeowners don’t know of the benefits of using Scotchguard until it’s too late.
Benefits of Using Scotchguard
- It provides a protective shield that wraps around each individual fiber of your carpet or upholstery. This sealing solution helps to prevent both water and oil based spills from staining.
- It can keep your carpet or cloth furniture looking new for longer than it would without it.
- It will save you money in the long run because you won’t have to invest in deep cleanings so often.
- It’s safe and can be applied on carpets, bathroom mats, couches, beach chairs, child car seats, and even canvas shoes. Essentially, you can use Scotchguard on any fabric surface that you want to be protected from stains.
A Word of Caution
Many people tend to believe that Scotchguard will be the solution to all your home cleaning problems. However, it is not. Scotchguard is a tool to ASSIST you in keeping your fabric surfaces looking new for longer. It’s still important to invest in regular cleanings and to clean up spills as soon as they happen.
While you can Scotchguard your carpets and upholstery yourself, you’d get even better results if you let professionals handle it. So, give the number one Orlando carpet cleaning company a call at 7407.688.2121 today to schedule your appointment.
Certainly any woman with an affinity for painting her fingernails understands the terror that sweeps over the body as you watch your open nail polish bottle topple over onto the carpet. If you’re a super ninja, you may be able to act fast enough to scoop up the bottle before any thick polish escapes.
Since not everyone can be so lucky, here’s a quick guide to help you get the polish out of your carpet.
How to Get Nail Polish Out of Carpet
Step #1 | Act fast.
The quicker you get a move on blotting up the spill, the higher your chances of successfully removing every hint of the stain.
Step #2 | Remove excess polish.
Blot the spill with a paper towel (or an old rag that you don’t mind staining) to absorb the excess color. Whatever you do, don’t rub the stain with any kind of back and forth movement. Doing this will actually push the color deeper into the fibers of your carpet making the stain harder to remove.
Step #3 | Spot test.
Before you try any treatment, test your selection on a part of the carpet that’s out of sight. This step is especially important if you have a dark carpet. You don’t want to accidentally lift the color from your carpet while trying to remove the pigment of your polish.
For darker carpets, remove the stain with hair spray or rubbing alcohol. Just spray the solution of your choosing onto the offending area and blot up the excess after a few moments.
If you have a lighter colored carpet, consider spraying the stain with non-acetone nail polish remover. Just make sure it is non-acetone. Products with acetone are almost certain to cause more damage than good.
Step #4 | Rinse.
Once the stain is removed, rinse the area well with water to prevent rapid resoiling. If the stain just won’t budge, contact a carpet cleaning company in Orlando for help. Just call 407.688.2121 today.
Just in case you aren’t familiar with the term, low-moisture carpet cleaning refers to any method of cleaning carpets that allows them to dry faster than standard methods. Generally speaking, carpets that are cleaned with low-moisture methods are able to fully dry in two to four hours, depending of the outdoor conditions.
Many people don’t realize, however, that there are a number of different low-moisture carpet cleaning methods. So, here’s a quick guide to help you understand the different options available to you.
Low-Moisture Carpet Cleaning Methods
#1 | Bonnet Cleaning
This is a style of carpet cleaning that involves the use of a low-rpm floor machine with a bonnet attached to it. The cleaner is applied and the bonnet removes it. Unfortunately, the soil tends to collect in the bonnet so it has to be changed a number of times during the cleaning -process.
#2 | Shampoo Cleaning
This method of cleaning involves the use of a low-rmp floor machine to apply a special detergent to the carpet. The application process helps to loosen up dirt and grime and it’s all sucked away with the help of a wet vacuum. Once the carpet has dried enough, it is vacuumed again to remove any remaining dirt.
#3 | Encapsulation
This is the quickest drying method because it usually requires no water at all. Here, chemicals are applied to the carpet using a machine that brushes the chemicals into the carpet. Once down, the chemicals crystallize and encapsulate the dirt and grime in the floor. After about an hour, the crystallized substance is vacuumed away.
To learn more about the different low-moisture carpet cleaning methods available to you, call (407)688-2121 today.
Low-moisture carpet cleaning is a carpeting cleaning method that has gained a lot of popularity recently. Unfortunately, with it’s popularity, quite a few myths about the method have become common knowledge. So, we come to you today to debunk the three most common low-moisture carpet cleaning myths.
Myth #1 | Low-moisture carpet cleaning is a process that only involves restorative cleaning methods that use extractors.
The truth is, there are a number of different low-moisture methods that can be used to clean your carpets. Depending on what you need, you can choose encapsulation, dry cleaning, bonnet cleaning, and more.
Myth #2 | Carpets cleaned with low-moisture methods get dirty again faster.
This is only true if you don’t let the carpet dry completely before you walk over it again. It is also up to the carpet cleaner to make sure that any chemicals used are fully extracted from the carpet. The sticky residue left by cleaners also contributes to rapid resoiling.
Myth #3 | Carpets cleaned with low-moisture methods dry super fast.
While this isn’t wholly untrue, you still want to make sure you give your carpet enough time to dry to avoid rapid resoiling. Two to four hours is usually plenty of time. However, if your carpet was deeply soiled, it may be a good idea to allow a longer period of drying.
To make sure you get the best low-moisture carpet cleaning available in Orlando, contact 407.688.2121 today.