Monthly Archives: May 2014

Deep Cleaning Your Rugs

It’s important to deep clean your rugs as often as you can. Today we have some tips on how best to do this. If you do this, you will love the way your rugs look for years to come. Read on to find out more.

Wash and dry

Consult the care labels for small rugs to determine whether they should be dry-cleaned, spot-cleaned, or laundered. A dry-cleaning-only label might indicate that a rug is not colorfast. Test before you spot clean.

When you determine that a rug is washable, machine-wash it on the delicate cycle. To reduce the risk of ruining long fringe, divide it into several hanks and wrap each one with white string. Put the rug inside a mesh laundry bag or zippered pillowcase in order to protect it from the agitator, and wash in cold water on the gentle cycle.

Hang wet rugs over a clothes-drying rack, a picnic table with slats, or several bricks stacked on a porch. Hanging a wet rug over a single clothesline will ruin the shape of the rug as it dries. Small rugs made from synthetic fibers that are similar to carpeting can be laid to dry on a small worktable or counter that is protected by a drop cloth.

Area rugs

These types of rugs will benefit from a deep cleaning every 12 to 18 months. When you use a commercial cleaning product, test a small area of the rug to ensure that it is colorfast and won’t be damaged by the product. To thoroughly clean a large rug, place it on a vinyl or concrete surface and apply this carpet cleaning foam and rub it in according to directions. Finish by rinsing or vacuuming. Make sure the rug is dry before you replace it.

Dry cleaning

This might also be an option for small to mid size rugs, but be sure to check the label for full instructions.

Woven or braided rugs

Check these rugs for stitching breaks before and after cleaning. Check the labels to determine whether small braided rugs are washable. If they are, place them in a zippered pillowcase or a mesh laundry bag. Wash these in a cool water setting on your washer, and rinse thoroughly. Tumble dry on a very low setting. Place large braided rugs on a vinyl or concrete floor or place an old blanket beneath them. Sponge commercial carpet cleaning foam over the surface and be sure to rub it in according to the product directions. Finish by rinsing or vacuuming. Be sure it is thoroughly dried before replacing the rug on the floor.

If you do each of these things, you will find that your rugs look beautiful and last for years to come! Consult our professional Orlando carpet cleaners for more information! We have all the info you need to get on your way to having beautiful rugs once again.

For more tips on deep cleaning your rugs and carpets, click here.

Cleaning Your Area Rugs

Keeping your area rugs looking their best is an important aspect to the cleanliness of your home. Rug care is determined by size, construction, and material. Care for large-size area rugs the same you would care for wall-to-wall carpet. Read on for more tips on how best to clean your large rugs.

Vacuum large rugs

Removing dirt from your large rugs is essential. As with carpet, the most important thing you can do for larger rugs is to vacuum them regularly. If your rug is reversible, vacuum both sides. This removes grit and grime that can wear out your rug prematurely. Take care not to vacuum the fringe of your rug, as this may ruin the nice look it may have.

Brush out pet hair

A vacuum will most often leave pet hair behind. Use a stiff brush to remove the hair, brushing in the direction of the nap of the rug. If you do this, you will see a greater improvement of the look of your rug. Pet hair makes it look dull and dirty, and a vacuum just won’t cut it.

Turn rugs each year

Foot traffic and sun can put extra stress on certain parts of your area rugs. Turn them once or twice a year to even out the wear that is placed upon your rugs. It will look much better this way.

Shake small rugs

If your rug is small enough, you can take it outside and shake it or beat it vigorously to remove dirt and grit. Some areas have ordinances about shaking rugs outdoors, so check your local codes.

Stain removal

Time is of the essence when your rug becomes stained. Remember to blot the stain – don’t rub it! – and remove moisture from spills as quickly as possible.

  • Alcohol/soft drinks: Use a solution of 1 teaspoon dish detergent, 1 quart warm water, and 1/4 teaspoon white vinegar. Apply to the stain, rinse, then blot dry.
  • Coffee or tea: Using the same detergent mix as above, apply to the stain, rinse, and then blot. If a stain remains, use a commercial spot carpet cleaner.
  • Fat-based stains: For foods such as butter, margarine, or gravy, use a dry-solvent spot carpet cleaner.
  • Gum: Peel off as much as you can, then put ice cubes in a plastic bag and place on the gum to harden it, then scrape the rest off with a spoon or knife. Vacuum and use spot cleaner if needed.
  • Paint: For acrylic and latex paint, while the stain is still wet, spot-clean with the detergent solution. If color remains, dab with rubbing alcohol.

Following each of these tips will help ensure that your rug stays beautiful and clean. You will love the results you get from having a clean rug and keeping it clean for long periods of time. A rug is a great way to beautify your home, and it’s important that your rug is clean to get that full effect. If you have any questions about carpet cleaning Orlando, contact us today!

Ceramic Tile Tips for Your Home, Part 3

Cleaning or installing new tile in your home is a great way to ensure that it looks beautiful for a long time to come. It is important that you employ the proper techniques when you are installing your tile, otherwise, you may find yourself with a difficult predicament. If you do this and do it carefully, you will find that your tile looks great and you are happy with the results. Read on to find out more about successfully installing tile into your home.

When the trowel gets jammed, butter the tiles

When you are working tight corners or edges, the trowel won’t be able to fit inside that space. The easiest way to work around this problem is to put the adhesive on the back of the tiles.

Don’t rush the cure

Even though all the tiles are down on the floor and set, don’t start putting the grout down until it is completely ready. Allow the thin-set to properly dry, otherwise you will damage the tiling job. It is important to do this in the proper manner, or your tile will end up looking terrible once it is finished.

Never trowel grout in a straight line

There are two types of grout- wall grout and floor grout. The only difference is that floor grout has sand in it and wall grout does not. Make sure the grout is the right consistency, and trowel it diagonally to ensure an even application. If you apply the wrong type of grout to your tile, you may have something that looks pretty poor in the end of your situation. Be sure to do it the right way.

Guarantee perfect gaps with plastic spacers

Buy the space between each of the tiles in a bag. Plastic spacers come in different sizes for the different sized tiles you may be using in your home. Simply place the little X’s between the tiles while they set, and then remove them before you grout. This will ensure the exact same amount of space between each tile.

Seal before tiling

Always waterproof your showers and wet areas before you tile them. Tile installations do not act as a moisture barrier. They are actually designed to protect the waterproof surface below them and make cleaning easier. There is a good range of waterproofing materials that are easy to apply and work very well.

Following these tips – like keeping the extra tiles just incase there is a problem – will help you to ensure that you have the best possible outcome with your tiles once you have completed your process. If you do this, you will find that you have clean looking tiles and your home will be very beautiful in the long run. Doing this will give you immense satisfaction and provide you with the greatest possible look for your home! Follow our tips and you’ll never have to worry about your tile again.

For more tiling tips, click here.

Ceramic Tile Tips for Your Home, Part 2

If you wish to have the best possible look in your home after you have installed tile, it is important to consider several factors before installing it. Today we have many tips that will help you to understand exactly what you need, and how best to install these tiles in your home. If you do this, you will find that your home will look better than anything you could have ever imagined on your own! Read on to find out more.

Make the most of a sticky situation

Thin-set not only keeps tiles on the floor, it can also make up for minor imperfections in the subfloor. There are many different thin-sets for each application of tile, but for ceramic tile, use a latex-modified thin-set. Latex modified thin-set only needs water to set up! Remember, only mix what can be spread or used in an hour, otherwise the job will become very hard. There is also a premixed thin-set that would be better for wall tiles. This is stickier and the tiles won’t move much. With thin-set, you can always add a little more on one side if the subfloor isn’t perfectly level or take away a little on the other side to straighten the subfloor.

If you’re cutting corners, rent a wet saw

Renting one of these will save you both time and frustration. Unless it is a perfect house with perfect rooms (which is impossible), you will need to cut your tiles. The time you save in cutting all the tiles perfectly will pay off immediately. Wet saws are relatively inexpensive and can usually be picked up at any home supply store.

Don’t rush yourself

If you rush, you will find that your job is much poorer than it would be if you give it the time and consideration it deserves. Making sure you have the best quality job done make take more time than you might want, but you’ll be much happier with the results in the long run. Doing so will help ensure you have the best quality job when you are finished. The time you save in cutting all the tiles perfectly will pay off immediately. Behind every quality tile job is an installer that chose to take his time. Even when you are working in a small area, don’t rush to lay the tiles down.

Following each of these tips will help ensure you have the best quality job for your money. If you do so, you will find that you will love the end result far after you have completed the job! If you have any questions at all about laying your tile, be sure to talk to one of our experts. We have all the tools necessary for getting your tile to look great as quick as possible. If your tile is dirty or needs to be cleaned, talk to us today!

Ceramic Tile Tips for Your Home, Part 1

Choosing the right type of tile for your home is vital for ensuring that your home looks as great as possible. Sometimes it is difficult to choose certain types of flooring for your home, so today we have some tips on choosing the best look for you. Read on to find out more about choosing the right kinds of tile for your home.

Bigger isn’t always better

This holds true for tile as well, but it doesn’t necessarily make it harder. Bigger tiles actually are easier to install than smaller ones. Larger tiles are commonly used for bathroom walls, but are great for kitchens and other rooms, too. The smaller 1x1s are going to take longer to set, so choose a small pattern.

What you can’t see will hurt you

If you don’t have a flat subfloor, you won’t have a successful install of your tile. Self-leveling subfloor compound works great and is easy for a DIYer to install. Other options are plywood or cement backer board, but regardless of what is used, the subfloor should be at least 1″ thick to ensure the best quality job. The most important aspect to making sure your tile looks great is making sure it is installed correctly. If your subfloor has any sort of problem that you cannot see, it will definitely come back to get you in the long run. It is vital that you know exactly what you must do underneath the tile before you install it, otherwise, it may fall apart without you even realizing what happened. It’s important to take good care of your floor.

Squaring a room is easy.

The best method to squaring a room is using a 3-4-5 triangle. Measure 3 feet against one wall, 4 feet to the center of the room, and connect the two lines to make a triangle with a 5 foot line. If the room is larger than that, use a 6, 8, and 10 foot line. If smaller, use 18″, 2′, and 2’6″. Mark off all the lines in the room by snapping a chalk line along the measurements.

Doing each of these things will help ensure that you have the best possible outcome with your flooring once it is complete! Doing so will give you a brighter and happier look if you have the tile measured correctly. If you also have the subfloor completed in the best way possible, you can be sure your floor will look great when it is all completed. It is very important to do these things if you want to have the best looking tile you can get.

Putting tile in your home doesn’t have to be a difficult decision, it is just important to know and understand all the facts before undertaking such a project. Doing so will help ensure that you have the best possible outcome with all your tiling needs, and that you are very happy with the results. Doing so will give you great and immense satisfaction in the look of your home. If you need carpet cleaning in Orlando, talk to us today!